开云体育

Does KiCad publish its roadmap for guiding future development publicly? If so, can someone please provide a link to it. Thanks.

out of curiosity: do you have any pictures and more information about the original author of KiCAD? Mr Jean Pierre Charras. I'm looking for a picture of him and I can't find it. I'm writing a book

Have been using Kicad 6 for some time. I installed Kicad 7 and a project I am working on has four different pcb designs. All were designed using Kicad 6. 3 of the boards migrated fine into Kicad 7 and I can edit the boards etc. However, one board does not allow me to edit it in Kicad 7, all tracks, vias and components are highlighted in purple and the lock/unlock toolbar options are greyed out. It is though something has completely locked up the design and I see no way to unlock it. TIA, Tony Osman

Hi All, is there a way to set specific clearance between via and track? In PCB Editor File->Board Setup->Net Classes I can only modify the 'clearance' which, I suppose, is the same for track to track as well as track to via. Several production sites however provide different specifications for via2track and track2track clearances. Obviously the latter is usually smaller. It would be nice to have it in kicad as well, thus my question. Regards, Milosz

This email is a "heads up" that Fedora Rawhide will soon have KiCad version 7.0.0-rc2. Designs created with KiCad 6 and earlier are readable / editable by KiCad 7. However, once a design is saved with KiCad 7, it will no longer be readable by KiCad 6 or earlier. By policy, numbered Fedora releases (F36, F37, etc) will not be auto-upgraded to KiCad 7, but builds will be available on Copr for those Fedora users who want to move forward. Steve

Hello! Is there anyone in Sweden that can do KiCAD jobbs for me? // GH -- G?ran Hasse Raditex Control AB Boo 229, 715 91 ODENSBACKEN, SWEDEN Mob +46 70 5530148 gorhas@...

Hi devs, I gave KiCad 7rc1 a try, and I have a question. I used to set up 3D model search path aliases, but I think this has been removed from v7. Is there any way to add (possibly more) 3D paths to Kicad to search for models? Thanks, Levente -- Levente Kovacs Senior Electronic Engineer W: http://levente.logonex.eu

I have recently installed KICAD on a new Win10 machine and when running ERC on an existing project (created on a different WIN10 machine) I get a string of these warnings (See attached RPT file). I know for a fact that I have never modified those symbols. What have I done wrong ?? Is there a way around this ?? The original project was created under 6.0.7 and the new machine has 6.0.10 Regards, Dave

I would like, that the displayed date in schematic and pcb-sheet will be automated with the date, when I save it (like SaveDate in Word)

My wish would be, that for the "find text" function would be more possibility of filters For example filter the search of labels according net label or global label or hierarchical labels

Has anyone experience of using the KiCad Nightly build alongside the Release build on the same (Windows) machine? I am interested to know if it worked well enough, or if there are any problems or pitfalls to watch out for. Nightly from here: https://kicad-downloads.s3.cern.ch/index.html?prefix=windows/nightly/ Release from here: https://www.kicad.org/download/windows/

I think the key problem here is physical and logical pin difference's check. actually current flow donot control on any mismatch check between any symbol/footprint's creation process because both always front&back end group team design activity. so the problem will finally catched until when user using symbol in schematic and sync to PCB with the wrong footprint.. we should make this kinds of check during the flow of footprint assignment tool instead of the function of "Update PCB from Schematic" Evel Liu o0oke@... ------------------ 原始邮件 ------------------ 发件人: "Andrew Armstrong"<andrew@...>; 发送时间: 2022年12月29日(星期四) 晚上7:09 收件人: "kicad-users"<[email protected]>; 主题: Re: [kicad-users] Linking between symbol and footprint ? There is a tool called "highlight wires and pins of a net" in the schematic editor just below the arrow tool at the top of the right hand toolbar. This highlights the trace and pins on the PCB window, if it is open (prefera bly on another screen) Andrew On 28/12/2022 04:46, David Slipper wrote: > When in the pcb editor you can click on a trace and have it > highlighted on the schematic editor. > > Is there a way of doing something similar between the symbol editor > and the footprint editor. > > Alternatively is there a way to detect any pins that don't tie up > between them ?? > > I have a rather large device to enter as a symbol and footprint and > checking it will take ages. > > Any advice is very welcome > Dave > > > > > > > -- e: andrew@... m: +44 (0)7802 740593 t: +44 (0)1525 376339

When in the pcb editor you can click on a trace and have it highlighted on the schematic editor. Is there a way of doing something similar between the symbol editor and the footprint editor. Alternatively is there a way to detect any pins that don't tie up between them ?? I have a rather large device to enter as a symbol and footprint and checking it will take ages. Any advice is very welcome Dave

Greetings, I am having difficulties understanding libraries. I am using KICAD, 5.1.9. I’m trying to create symbols and footprints and I don’t understand how to select where to store the library. I would appreciate some help on this or a pointer where it is explained on the Internet. Thank you, jeff

Hi all, KICAD 5.1.9 how do I delete libraries? The libraries are empty and I don’t want them anymore. Thanks, jeff

does anyone know how to reverse engineer gerbers, and create a pcb from gerbers? Alguem sabe como fazer engenharia reversa com os gerbers, e criar uma pcb apartir dos gerbers????