¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Kicad-Users
  2. Topics

netclass issue with the kicad 7

 

Hi,

I have a problem. I have switched from kicad 6 to kicad 7.

image.png

I have discovered a problem with the netclass.

In the schematic the kicad have add name to the track (NET-(U1-VOUT/FB)

image.png


But in the PCB editor ... the kicad have added (NET-(R2-Pad1) between the two resistors

image.png

I tried to update the pcb from the schematic but it did not change anything.

What is the problem?

Thank you for your help.

Br: S¨¢ndor


--
Best regards / ?dv?zlettel,

S¨¢ndor Kov¨¢cs
Electrical Development Engineer
AlbaPartiscum Kft.
Tel: +36 30 419 54 48?? ?
kovacs.sandor@...
 

Hi S¨¢ndor

It seems like you have the resistors meet end-to-end and have the wire connect in the meeting point. I am not sure that works. What happens if you include a small piece of wire between the resistors that the branching wire can connect to?

/Poul
 

Good design practice - name critical nets with own name (e.g. FB)
 

Also...
I have not idea what controller you use, but usually R2 (and R3) have capacitors connected in parallel.
Check your calculations.

1 - 4 of 4