开云体育

I'm not yet skilled enough in KiCad to know of that feature. Thanks for the tip. John -- John DeArmond jgd@... jgd@...

>>>>> "NeonJohn" == NeonJohn <jgd@...> writes: > On 11/3/22 16:36, russ95462 wrote: >> Hi, >> >> ? ? I need a ground strap so I can connect the signal and power planes >> at a point of my

This is an absolutely vital feature for what I'm now doing. I design induction heater boards for my friend's company (fluxeon.com). On one end of the board is the 3.3 volt processor and analog

I usually just use a jumper, or if there is a lot of power, a series of jumpers.

I don't want to sound too critical, but didn't you check the Gerbers before sending them out for PCB manufacture? -- Regards, Tony

you may need to switch from 4.0 to 5.0, then 6.0. the changws are so huge that there is a risk you loose parts or featires along the way. Try with a copy of the projects first to see how the

Hi, I need a ground strap so I can connect the signal and power planes at a point of my choosing. In the past it was possible with a bit of messing about to create a component that did this, however I

Exactly what is the problem. Kicad 5 can read kicad4 circuits with no problems Andy "Marco Ciampa" <ciampix@...> wrote:

I don't know if it is a KiCad problem, a video card problem, or something else in the rendering stack. VNC works well enough for my use-case. I mostly just run KiCad natively on my desktop, and only

Can somebody address this request or at least point to the right direction of how to solve it in the easiest way? ----- Forwarded message from Rahul Paknikar <srahulp14@...> ----- Date: Thu, 3

On 2022-11-03 15:10, Steven A. Falco wrote: [Kicad croaking] >> Does this happen right when you start Kicad or a little later, like when starting an actual editor? > It happens as soon as I try to

It happens as soon as I try to open an editor. I can open the main KiCad window without issues, but if I then try to open a schematic or pcb, it gets the DRI errors.

Does this happen right when you start Kicad or a little later, like when starting an actual editor? Yeah, we are using this solution too ATM. But it is far from ideal, because the desktop size is

On 2022-11-02 18:18, Mark Goldberg wrote: Greetings all! > Unfortunately, not answering your question, but I tend to run old > software in a VM with an old OS, and run the actual machine with a > new,

On 11/2/22 12:27 PM, dracolich@... wrote: > Hello dear readers! > We are currently checking out Kicad in our company. We are a small engineering firm. > Because we have to use pay-soft on a

Unfortunately, not answering your question, but I tend to run old software in a VM with an old OS, and run the actual machine with a new, up to date OS with recent security fixes. If you back up the

Hello dear readers! We are currently checking out Kicad in our company. We are a small engineering firm. Because we have to use pay-soft on a regular basis (there is no OpenSource alternative that is

Looks like Sebastian has tried to fix that link at least once before. It might be best to try contacting him directly. A google search shows info on linkedin

If you are referring to :- https://ci.appveyor.com/api/projects/sebcaux/uconfig/artifacts/uconfig-win32-v0.zip That is the one that returns the error. The two links further down are components

Look at the bottom of the github readme. https://github.com/Robotips/uConfig Andy "David Slipper" <softfoot@...> wrote: