开云体育

Hello I would like to ask if any link or information available for downloading KiCAD KLC as PDF? https://klc.kicad.org/ -- Regards, Victor

I am running Kicad v6.0.2 and am trying to use "Net highlighting" on my PCB but the button on the left toolbar is permanently greyed out ?? What am I doing wrong ?? The board is fully routed and

Still a good find.? I had to really search for the thermal resistance, and it wasn't particularly useful when I found it. -- Oz (in DFW) N1OZ

Final result using Custom Shape Primitives

Hi, Correct, page 15 under "Layout Considerations" it says "Make sure to minimize the solder joint resistance at these VDD pins by applying solder along the whole length of the V DD bar[...]" This

My guess is that they expect solder along the strip, either for current capacity, thermal transfer, or both. This is one of those cases where you want a part in hand as the documentation is wholly

At least this will violate AD recommendation. Also... do you have any PCB DRC errors about clearance?

I would just create the 36 pads, and then run a strip of 'copper' across the back end of the pads. This will allow the pads to produce the solder mask for each individual pin without having a long

UPD: Found nice tutorial for creating custom primitives https://www.youtube.com/watch?v=pSS_IRM5KIY

Hi Reinier Thank you very much. Your recommendation work well! Any other ways for creating specific pads? Unfortunately (AFAIK) KiCAD can not define polygon (or poly combination) as pin ... Am I

One easy way to do this is to place normal pads and one long horizontal pad on top of them. You give them all the same pad number, so KiCAD knows they are connected. For each pad you can enable or

Hello, There are LT4200 datasheet https://www.analog.com/media/en/technical-documentation/data-sheets/lt4200.pdf Any idea how to create "comb pad" shape (outlined red)? Can I draw shape like filled

Thanks Andy,? I did locate a couple of other sellers here in the US, but they don't sell small quantities so if I use them I'd have to buy a lot of the dry film.? Since initially I just want to test

Hi Burt, Glad it worked out in the end, even if it's a bit of a fiddly process :-) I've never tried diy solder mask, and the main supplier of soldering products over here in the uK that I used (Mega)

Thanks Andy, What worked for me was to mirror all the text on the Front Silk Screen layer, print non-mirrored to the transfer paper.? That gives the transferred silk screen with the components in the

Is there any guidance on developing and debugging plug-ins ?? Regards, Dave

There is a specific page on OSHPARK for kicad: https://docs.oshpark.com/design-tools/kicad/generating-kicad-gerbers/ Usually what you upload will be automatically checked and you can use the viewer on

THANK YOU VERY MUCH Jorge Sent from Mail for Windows Sent: Saturday, March 5, 2022 8:37 AM To: [email protected] Subject: Re: [kicad-users] FW: 83 YR OLD NEWBIE HELP Hi About what files to send,

Hi About what files to send, ususally the gerber and drill files. For details look in https://oshpark.com/#support Archive or ZIP is almost the same. By archive we mean a set of files compacted in a

Sent from Mail for Windows From: Sent: Saturday, March 5, 2022 8:20 AM To: KICAD-USERS@GROUPS Subject: 83 YR OLD NEWBIE HELP Good morning!? I’m using KICAD 5.1.9 on Windows 10. I’m using OSHPARK