Hello acidblue
Are there any shem symbols for a resistor network in kicad?
Of course, you will find the resistor array symbols in the ACTUAL
Version of the library "SymbolsSimilarEN60617+oldDIN617-RevE3.lib".
It is at the attachmend, but you should find this file also at the file
repository of this user group.
The library SymbolsSimilarEN60617+oldDIN617 wich is in the actual KiCAD,
is about one and a half year old, so much has changed.
Be carefull, if you have an old design with an old library, an choose
now a new version of this library. If only the nuber of revision is
changed, i worked on errors and added new symbols, but if the letter is
changed, much moore is changed, like origin points, dimensions and
names.
But i did not create a module library for resistor arrays yet.
There also different types of resistor arrays. Most common are a single
in line row, and all resistors are conected at one side. This connection
is usually at one end of the row.
But there are also arrays of separated resistors in a row.
for SMD, the variations seems to be even greater.....
Specifically I'm look for 6 pin and 10 pin bus sip symbols.
I named them RESISTOR_4XARRAY_BUSSED_SIL......... and
RESISTOR_6XARRAY_BUSSED_SIL.........
Please tell me, if it is what you want, and please tell me, if you found
some errors.
I just created some boards and noticed, that i made a huge mistake with
5x20mm fuse Sockets from my own. :-(
Now i have boards with a fuse socket footprint, which is 5mm too long,
and i even fought hard, to get this fitting to the board.....shit
happens.
With best regards: Bernd Wiebus alias dl1eic
