It's 'Update the PCB from schematic' that
causes the problem.? V8 seems quite a bit different from v6, and
better, but driving lessons are required.
On 2024-05-23 14:03, Alan Pearce via
groups.io wrote:
You should be able to 'feed forward' the changes.
That should then renumber the component placements. I can't
remember the appropriate commands at the moment, and I also
haven't got around to playing with v8 yet (but hope to do so
soon).
I asked KiCad to renumber the
components on the schematic. What I didn't realise is
that it turns the PCB into a disaster area, because many of the components are then in the
wrong places, with wrong connections. Is there a way to
recover from this, or do I have to delete all the
components and tracks and start again?? Is there a way
to prevent the disaster, other than not renumbering?
I have another question: is there a
way of printing the list of keyboard shortcuts? Since it
is an HTML page in the on-line manual, I can't see how
to do it.
--
OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh,
Essex UK
Keep trying
--
OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh, Essex
UK
Keep trying
John Woodgate