Open Figure2.pro and save as Figure3.pro. This clones the entire
project under a new name.
You can also open a blank schematic and copy and past the old one
in.
On 2023-05-21 7:23 a.m., John Woodgate
wrote:
toggle quoted message
Show quoted text
I have to make two schematics
that are the same except for component values. I have made
one, in Figure2.pro, called Figure2.sch. I want to copy it
to a new Figure3.pro. I tried making a copy of Figure2.sch,
changing its filename to Figure3.sch and adding it to the
Figure3.pro folder, but it not 'seen' by the .pro. Is there
a way to do what I want?
--
======================================================================================
Best wishes John Woodgate OOO-Own Opinions Only
Rayleigh, Essex UK
I hear, and I forget. I see, and I remember. I do, and I
understand. Xunzi (340 - 245 BC)
