Re: Kicad is there a way to show a symbol on the schematic but not on the pcb ??
|
Hello.
Ok, Tony, this is true, but not working. The components appear in the netlist and on pcb. You don't see it only in the 3D immage. This is my experience.
Angelo
Il giorno ven 30 set 2022 alle ore 22:04 Tony Casey < tony@...> ha scritto: On 30/09/2022 21:00, David Slipper wrote:
> If I have (say) a LED that is mounted on the case but wired to a
> connector on the PCB I would like to show the connector on the
> schematic with the LED symbol beside it (indicating the polarity) but
> not have it appear on the PCB.
>
> Is there a way to do this ???
Yes. If you open properties of the symbol that is placed on the
schematic (or by double-clicking on the symbol in the schematic), there
is a checkbox: Symbol Properties > Attributes > Exclude from board.
There is another checkbox that can exclude it from the BoM too.
--
Regards,
Tony
|
