¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Kicad-Users
  2. Messages
Single Messages Topics Expanded Polls

Re: Traces don't track Footprints during move

 

¿ªÔÆÌåÓý

Thank you all for the replies regarding this. I still am seeking a solution however so let me clarify what I need to do:

I frequently design boards with high density pin foot prints----PIC24s with 100 pins, headers with 76 pins etc.
I generally have to move the items, often just a small amount, during design. As and example I may want to move a PIC24,? 2mm to the right-- stretching the traces as I go--and then occasionally need to adjust some of the tracks slightly afterwords but often not. (as an example, ExpressPCB and Orcad users my do this)

What I have seen so far with KiCad is that the footprint can be moved or dragged, but the traces do not stretch--they leave behind white "rubber bands" and I have a huge amount of work left over to reconnect 100 pins. I am trying to avoid this.

thanks
fritz

On 12/13/2019 9:07 AM, Aaron Wolfe via Groups.Io wrote:

Hi Fritz,

One other option that I tend to use as much as 'G' (for drag), I often select a block (by click-hold and drag), and then press the Tab key to drag the entire block with rubber banding wires.

As a side note, most useful options show up in the right click menu.? For example drag shows up when you right click a component, and drag block shows up when you right click after selecting a block of components.

Hope that helps,
Aaron


On Thursday, December 12, 2019, 9:22:20 PM EST, fritz <fsonnichsen@...> wrote:


Using past board layout tools when I move a footprint the traces drag
along with it.
I cannot seem to get this to work in KiCad --i have tried "M", selecting
and moving, "drag" and so forth but cannot find how to do this nor can I
find it in the doc.

Any help here appreciated-

Thanks
Fritz
Join [email protected] to automatically receive all group messages.