开云体育

  1. Jmriusers
  2. Topics

After Windows 11 upgrade I can no longer communicate via NCE USB module #nce #windows

 

I have put all four of the jumpers back on the board and changed to 19,200 in the advanced section.

I got a normal startup, I will monitor.

Thanks for the great help.

Bill

_____________________________________________
Bill Suarez - +1 508-735-7877 - wsuarez@...

From: "Ken Cameron via groups.io" <kcameron@...>
Sent: Monday, March 10, 2025 5:34 PM
To: [email protected]
Subject: Re: [jmriusers] After Windows 11 upgrade I can no longer communicate via NCE USB module

Bill S,
?
The 7.3.0 in the log says you have no jumpers on the NCE USB. That code tells JMRI that the system is a PowerCab and it has the old 1.28 firmware.. The error message says that’s not what you are telling the system connection.
?
If you have two profiles, one for a PowerCab so you can use it to have a programming track, another profile for an SB5, and both have the 1.65 firmware, you would do best to set all jumpers on the NCE USB. Then use 19,200 baud for the connection. You should see it report as 7.3.7 in the log which means all systems and both profiles would work correctly with their respective settings.
?
With a SB5 system it is important to set the right command station so JMRI know that only ops mode programming will work.
?
-Ken Cameron, Member JMRI Dev Team
?
?

smime.p7s
smime.p7s

21 - 21 of 21