开云体育

Would it be possible to change the information fields at bottom of the ROSTER window so that the 'Active Profile name'? does not go off screen and get replaced by the 'Programmer Status message'.

My profile names are setup so I can determine at a glance what setup I am on (PR3_DCS50, PR4_Standalone) and the Profile name gets shoved off end of screen when the Programmer Status messages
are long like? such as :? "Stopping due to error; No locomotive detected (301); No acknowledge from locomotive (308) "

I have to make the window so wide to encompass ALL messages.?

Doubling the line would fix this issue for me.? Having the Service mode, Operations Mode? on one line and below it the Programmer Status and Active Profile.? That or move the Active Profile name field to some other location.

Marc

Marc

I would like to see that also. When programming I switch between programmers and Profiles because some programmers work better with some decoders, and when a long error message comes up and obliterates the Active Profile name it can get confusing. Having the Active Profile name always visible would be very helpful. If there’s not room at the bottom maybe on the top toolbar?
Thanks.
--
Mike Heintzman
Modeling the P&PU since 1953

Marc,

Can you create an issue for this so it doesn't get lost here.


--
Peter Ulvestad

JMRI Users Group Moderator - ( )
Tam Valley Group Moderator - ( )
Sprog-DCC Group Moderator - ( )
Edmonton Model Railroad Association -