¿ªÔÆÌåÓý

Locked DecoderPro decoder selection for Athearn Genesis U50


 

I tried using Tsunami gas turbine and it seems to change things, however on a run track the locomotive just makes an engine noise and does not respond to throttle nor F0 to turn on the lights.

Thanks


 

It seems the locomotive only uses short addresses so it is now 37 and either gas turbine or dual 645 (all I have tried) do about the same - lights turn on and off and the locomotive moves. bell rings horn toots.

SO the problem was more that it cannot do long addresses ...

If anyone actually knows a real answer Please post it


 

¿ªÔÆÌåÓý

It sounds like you may have a non-zero value in CV19 (the consist address).

--?
Dave in Australia

The New England Convention 2018

On 16 Jul 2018, at 12:22 PM, Ivan Herring <ilhonweb@...> wrote:

It seems the locomotive only uses short addresses so it is now 37 and either gas turbine or dual 645 (all I have tried) do about the same - lights turn on and off and the locomotive moves. bell rings horn toots.

SO the problem was more that it cannot do long addresses ...