Bob (black bart type<G>,
Notice also that DecoderPro has two boxes and they both read the same
address which is not correct. The DCC address should be something like
793-796 and the card number (address ) should be 199, as an example. I not
sure what is supposed to read back. Also Digitrax will not program the full
capacity of this card because it's limited to 999 stationary decoder output
addresses and the AD4's will do 2044 output addresses.
So a Digitrax command station is only good for card numbers to 249 which
are output addresses 993 to 996.
And I'm getting totally confused about this unit<VBG>.
Also remember that the AD4 can have "ganged" addresses. Like for
setting up a path through a yard. [The tomorrow file!]
