After testing the throttle on panel pro. I experienced something very odd.?
?
As usual, the power button (that is labeled layout power State) is still yellow and says: layout power State unknown. Click to turn off.?
?
Now on the panel pro tab, the power button is basically unresponsive as I've tried numerous times to click on it to turn on to try to use the Wi-Fi.
?
Now on the throttle, there's that same power button, which again was unresponsive. This however changed after doing certain steps.?
?
I tried clicking on the power button after I tested the throttle with the locomotive I had on my layout and nothing happened. I did happen to then click on one of the function buttons after and noticed that the power button then turned red to the off position. I thought that was odd so I clicked on the power button again to try to see if it turned on (green) but it only turned back to yellow.?
?
I then clicked on a function button once again to try to test the sequence again but upon pressing the power it actually turned green to the on position. I also happen to still have the panel pro server screen still open to which the power button on. There was also changing and corresponding with the one on the throttle. Now I didn't test it, but I'm hoping that the server at least turned on like the power button is indicating.
?
I tested the sequence a couple times and the same thing happened every time.
?
Now I'm not sure what's going on. Is it working? Is something still kind of messed up? So far this is the only way that I've been able to get the power button to change at all (on or off). This would be a really odd way to have to turn on the Wi-Fi every single time.?
?
?
?
