开云体育

  1. Jmriusers
  2. Messages
Single Messages Topics Expanded Polls

Re: jmri 5.10 automation no longer functions

 

Tony,

The "slot" messages indicate Digitrax issues.

The "LogData" messages are from LogixNG definitions that show the sensor and block changes. ?You can suppress these by going to Tables -> LogixNGs and deselect the checkbox for each LogixNG. ?These are used to correlate JMRI events with the LocoNet monitor events.

Dave Sand



----- Original message -----
Subject: Re: [jmriusers] jmri 5.10 automation no longer functions
Date: Monday, April 07, 2025 11:55 PM

Ps: ?what does all the warnings in the system console mean?
Tony




On Apr 8, 2025, at 12:43?AM, AD <bklyns_baseball_club@...> wrote:
?Ps:

The engines are address 26 in slot 3 and engine address 5022 in slot 4

Tony




On Apr 8, 2025, at 12:34?AM, AD <bklyns_baseball_club@...> wrote:
?
Loconet monitor data for train 1 crashing into train 2 sitting in b1

Tony

?
14:52:34.634: [A0 0C 00 53] ?Set speed of loco in slot 12 to 0.
14:52:34.853: [A0 01 00 5E] ?Set speed of loco in slot 1 to 0.
14:52:35.056: [A0 02 00 5D] ?Set speed of loco in slot 2 to 0.
14:52:35.446: [A0 05 00 5A] ?Set speed of loco in slot 5 to 0.
14:52:35.587: [A0 04 00 5B] ?Set speed of loco in slot 4 to 0.
14:52:35.681: [A0 06 00 59] ?Set speed of loco in slot 6 to 0.
14:52:36.181: [B2 06 70 3B] ?Sensor LS14 (B14 SENSOR) is High
14:52:49.948: [A0 03 00 5C] ?Set speed of loco in slot 3 to 0.
14:52:50.854: [EF 0E 7B 01 10 03 77 07 76 06 00 00 00 77] ?Request Fast Clock is Synchronized, Running, rate is 1:1. Day 6, 14:52. Last set by ID 0x00 0x00 (0).
??????Master supports LocoNet 1.1; Track Status: On/Running; Programming Track Status: Available.
14:52:50.917: [B4 6F 7F 5B] ?LONG_ACK: Function not implemented, no reply will follow.
14:52:55.263: [B2 07 50 1A] ?Sensor LS15 (B15 SENSOR) is High
14:52:56.966: [B2 07 40 0A] ?Sensor LS15 (B15 SENSOR) is Low
14:53:04.062: [A1 03 00 5D] ?Set loco in slot 3 direction Forward F0=Off F1=Off F2=Off F3=Off F4=Off.
14:53:21.736: [A0 0D 00 52] ?Set speed of loco in slot 13 to 0.
14:53:24.658: [A0 0C 00 53] ?Set speed of loco in slot 12 to 0.
14:53:24.862: [A0 01 00 5E] ?Set speed of loco in slot 1 to 0.
14:53:25.081: [A0 02 00 5D] ?Set speed of loco in slot 2 to 0.
14:53:25.456: [A0 05 00 5A] ?Set speed of loco in slot 5 to 0.
14:53:25.596: [A0 04 00 5B] ?Set speed of loco in slot 4 to 0.
14:53:25.690: [A0 06 00 59] ?Set speed of loco in slot 6 to 0.
14:53:27.878: [A0 07 00 58] ?Set speed of loco in slot 7 to 0.
14:53:29.878: [BB 7B 00 3F] ?Request Fast Clock information.
14:53:29.893: [E7 0E 7B 01 64 07 77 07 76 06 00 00 00 0F] ?Response Fast Clock is Synchronized, Running, rate is 1:1. Day 6, 14:52. Last set by ID 0x00 0x00 (0).
??????Master supports LocoNet 1.1; Track Status: On/Running; Programming Track Status: Available.
14:53:38.904: [A1 04 00 5A] ?Set loco in slot 4 direction Forward F0=Off F1=Off F2=Off F3=Off F4=Off.
14:53:38.904: [A0 04 40 1B] ?Set speed of loco in slot 4 to 64.
14:53:39.951: [A0 03 00 5C] ?Set speed of loco in slot 3 to 0.
14:53:41.280: [D0 20 02 27 1E 34] ?Transponder address 5022 present at LR3 () (BDL16x Board ID 1 RX4 zone B or BXP88 Board ID 1 section 3 or the BXPA1 Board ID 3 section).
14:53:41.498: [B2 01 50 1C] ?Sensor LS3 (B3 SENSOR) is High
14:53:43.014: [D0 00 01 27 1E 17] ?Transponder address 5022 absent at LR2 () (BXP88 Board ID 1 section 2 or the BXPA1 Board ID 2 section).
14:53:45.077: [B2 00 60 2D] ?Sensor LS2 (B2 SENSOR) is Low
14:53:45.615: [D0 20 03 27 1E 35] ?Transponder address 5022 present at LR4 () (BXP88 Board ID 1 section 4 or the BXPA1 Board ID 4 section).
14:53:45.818: [B2 01 70 3C] ?Sensor LS4 (B4 SENSOR) is High
14:53:46.380: [A0 03 40 1C] ?Set speed of loco in slot 3 to 64.
14:53:47.333: [D0 00 02 27 1E 14] ?Transponder address 5022 absent at LR3 () (BDL16x Board ID 1 RX4 zone B or BXP88 Board ID 1 section 3 or the BXPA1 Board ID 3 section).
14:53:49.630: [B2 01 40 0C] ?Sensor LS3 (B3 SENSOR) is Low
14:53:50.201: [D0 20 04 27 1E 32] ?Transponder address 5022 present at LR5 () (BDL16x Board ID 1 RX4 zone C or BXP88 Board ID 1 section 5 or the BXPA1 Board ID 5 section).
14:53:50.592: [B2 02 50 1F] ?Sensor LS5 (B5 SENSOR) is High
14:53:50.967: [EF 0E 7B 01 0F 03 78 07 76 06 00 00 00 67] ?Request Fast Clock is Synchronized, Running, rate is 1:1. Day 6, 14:53. Last set by ID 0x00 0x00 (0).
??????Master supports LocoNet 1.1; Track Status: On/Running; Programming Track Status: Available.
14:53:51.029: [B4 6F 7F 5B] ?LONG_ACK: Function not implemented, no reply will follow.
14:53:51.967: [D0 00 03 27 1E 15] ?Transponder address 5022 absent at LR4 () (BXP88 Board ID 1 section 4 or the BXPA1 Board ID 4 section).
14:53:53.968: [B2 01 60 2C] ?Sensor LS4 (B4 SENSOR) is Low
14:53:54.655: [D0 20 05 27 1E 33] ?Transponder address 5022 present at LR6 () (BXP88 Board ID 1 section 6 or the BXPA1 Board ID 6 section).
14:53:56.203: [82 7D] ?Set Global (Track) Power to 'OFF'.
14:54:11.750: [A0 0D 00 52] ?Set speed of loco in slot 13 to 0.
14:54:14.672: [A0 0C 00 53] ?Set speed of loco in slot 12 to 0.
14:54:14.875: [A0 01 00 5E] ?Set speed of loco in slot 1 to 0.
14:54:15.094: [A0 02 00 5D] ?Set speed of loco in slot 2 to 0.
Join [email protected] to automatically receive all group messages.