Thanks you both for the replies.? I'm very thankful for the effort to solve my questions.? I'll work on them later today if I can.
?
Tony, I have my panel set up with Blocks and Sections, and was working on Transits.? A couple of the Turnouts are in Blocks by themselves, but most of them are part of the Block on the points side of the turnout.? I can't wire them separately at this point.? I've never heard of Ghost Blocks.? I also use only the stable versions of JMRI.? I will look into your suggestions.? I will look this up when I get chance.
?
Dave, I will also get the layout uploaded later today.? I should have thought of uploading it, you and others helped me once before by doing that.? Per your question, I ran into the continuing route problem on the Layout Panel, trying to get the Transit to exit Block Apex Gate via LT501 into Block Ramp 1.? It only offered diverging route Ramp 2.? I also noted that trying to go the reverse direction, a Transit exiting Block Ramp1 and intending to continue into Block Apex Gate.? The Apex Gate Block was not available.? Astoundingly, though, exiting turnout LT501 via Ramp 2, the diverging route, was available.? quite a tight turn!
