David,
Step 1: ?Use the Layout Editor "Tools -> Check" menu items to clean up the non-contiguous blocks.
Step 2: ?Run the GrandReset.py script. ?This will delete all of the transits, sections, SML and block paths. ?After doing a Store and re-start, use "Auto Generate Signaling Pairs" in the Signal Mast Logic table menu to create new SML.
I have not looked at all of the signals yet, but it appears that the inner loop signals are all set for counter clockwise traffic. ?If so, that explains why the buffer signals have no SML. ?There is no source signal for clockwise traffic.
Dave Sand
----- Original message -----
Subject: [jmriusers] Signal Mast Logic
Date: Wednesday, March 19, 2025 6:43 AM
Hi All,
?
I have added the panel file ?exhib.xml to the David Smith folder in ProblemsBeingWorked?
There are some issues with some of the signal masts.
Could someone please advise what the problem may be ?
?
Buffer masts Mst_Buff_SdS4, Mst_Buff_SdS5, Mst_Buff_SdS6 are set to Unknown
?
Mst_SE3, Mst_SE2, Mst_SW3e, Mst_SW3f, Mst_W4 signal logic does not see other masts correctly
( I am aware that I could fix the issues by manually editing the signal logic but would prefer not to )
?
Can I also please ask, if ?I add a mast that is not visible on the panel, is there a way to see or edit it afterwards ?
?
Also, can I ask why all of the signal heads appear in the Turnouts table ?
?
Thanks
Dave
