Re: Problems With dispatcher #dispatcher
|
Brett, The first thing to fix is the direction sensors for "Block 3 TO". ?This is cosmetic but confusing. ?Then you need to use the Sections tools menu to Remove Direction Sensors from SSL and then Set Direction Sensors in SSL. Here is the Dispatcher options that I used for your layout. The "Train in selected Transit" wants to know if the first block is occupied by the desired train. ?I have never tried an alternate starting location, so I always check it. When using signal heads with SSL, you always need to have direction sensors. ?They become part of the SSL definitions. ?I prefer to use signal masts with signal mast logic. ?Then direction sensors are optional and generally not used. Setting up signal masts and SML is different. ?A good introduction is at? Dave Sand ----- Original message ----- From: "redsash63 via groups.io" <redsash63=yahoo.com.au@groups.io> Subject: Re: [jmriusers] Problems With dispatcher #dispatcher Date: Tuesday, March 11, 2025 7:40 PM Hi Dave? I have updated the File Ive created 3 Sections and One transits for testing. ? Q.When i come to Run the train Auto there is a Box that says "is train in transit"not sure if thats asking if the train is in the position it should be?The reason i ask is under that there is a drop tab,if i dont tick the above option there is a block saying 2-2,if i do it changes to 1 (the first section of the transit).Thats confusing question i know say ignore if irrelevant. Cheers Brett |