Jay,
I have never used CMRI for anything, so I am not a good judge of
how much any of our clinics would be applicable to your hardware.
I'm guessing that JMRI levels the field a lot between different
hardware systems, but any of my recent clinics would be aimed at
using LCC hardware, not so much at using JMRI itself, so probably
not be of much use to you. :(
The advantage of JMRI over VB is that it has lots of rules for
signaling on different railroads built in, so it is much easier
than figuring out the rules on your own. Also it can do operations
in higher level concepts like aspects and masts.
Dick :)
On 1/25/2025 10:03 AM, Jay Beckham
wrote:
toggle quoted message
Show quoted text
My situation is I presently have a working, so of, CMRI CTC.?
However the person that wrote the Visual Basic won't help fix
some of the problems.? So given the investment in hardware I
plan to use the hardware but just JMRI for software and make the
corrections I need and not have to rely on someone that isn't
willing to assist us anymore.
But don't want to rely on Clinics you created if they are way
different from the 2025 version of PanelPro.? I also dislike
using videos as they are to follow if you trying to work with
JMRI and watch the video at the same time.
So I am making changes to the model board and reassign block,
OS, and Switch numbers to match the railroad.? Then will fill in
the JMRI lists to match the actual track arrangement and
hopefully set it all on the panel and then create the ABS first
and then add the physical CTC to JMRI.
?
Also Dick, I kind of remember you visited by layout in
Berkeley Springs, WV many years ago during a convention.
?
Jay
