Vimal,
Does the connecting track segment between the diverging legs have a block assigned? ?It gets the block from either TL0 or TL1. ?From the Layout Editor menu, look at the Tools -> Check menu items.
Dave Sand
----- Original message -----
Subject: [jmriusers] Block routing through crossover turnout
Date: Monday, December 16, 2024 7:26 PM
I have a number of crossovers on my layout. I have created them out of 2 single turnouts (either RH or LH).
Each turnout is assigned its own block because I am using signal masts.
?
The problem is that when I right click on a turnout and bring up context menu and select 'view block routing', it only shows straight track blocks connected to it. It doesn't show any connection to the other diverging path that is connected to companion turnout in the crossover.
?
Because of this, I am not able to create transits through the diverging paths of the crossovers.
?
Here is a rough sketch:
?
? ?BLK0 --- ?TL0. --- ?BLK1
? ? ? ? ? ? ? ? ? ? ? ? \
? ? ? ? ? ? ? ? ? ? ? ? ?\
? ?BLK2 ----- TL1 --- BLK3
?
The block routing for TL0 turnout only shows BLK0, BLK1 connected. It doesn't show block TL1. (same for TL1's block routing)
?
What am I doing wrong?
?
--
+===============================
|. Vimal Parikh
+------------------------------------------
| JMRI version: 5.8+
| Java Version: 17.0.10
| Command Station: DCC-EX version 5.0.7
|.Host: MacBook Pro Sonoma 14.6.1
+===============================
