Pete
First. Are you using "Signal Masts", "Signal Heads" or "No signals"?
Speed settings differ between them.
Are you using speed profiled locos or not?
?
If you are not using speed profiled locomotives then "speed" is relative to the maximum line speed, else speed is scale mph/kph". I strongly recommend speed profiling your locos, you dont have to do every step, start with step 42 and increment 42) 0,42,84,126.
?
If not using scale mph/kph? the maximum line speed is the maximum speed existing on the layout, and speeds are a percentage of that.?
?
?
If using SSL the basic speeds are red,yellow,green, lunar -> stop (0) ,slow (30%), normal (60%) ,restricted (20%).
If using SSL with a speed profile it uses the displayed aspect.?
If using SSL the max of block speed? and aspect speed is used.
If using SSL the speed is set according to the signal infront / block infront.
If using SML the speeds is the minimum of aspect and path speed.
If using "No Signals" it uses Stop, Medium, Normal. or the block speed if lower.
?
The speed is then adjusted by max speed and speed adjustment.
?
Steve G.
?
?
?
?
?
?
?
?
?
?
