开云体育Hi En-TACT Are you still having problems getting Decoder Pro to work with your Power Cab & USB Interface? Regards Marcus ? From: [email protected] <[email protected]> On Behalf Of En-TACT
Sent: Wednesday, 11 September 2024 2:49 AM To: [email protected] Subject: Re: [jmriusers] JMRI Error: Service mode programmer NCE is offline. #nce ? The NCE USB Interface is set to COM3 and device is working properly.? Whether the USB Version is set to 6.x.x or 7.x.x in DecoderPro, it starts online then after 10 seconds of running, the error message appears in red at the bottom.? See screenshots.? Maybe it's the USB type A to USB type B cable? ? BTW, I have an NCE PowerCab and the NCE USB Interface jumpers are set to the following, J1 = ON J2 = OFF J3 = OFF J4 = OFF? ? ? ? |