开云体育

On Apr 30, 2023, at 4:32 PM, Tim Kelley <tim.kelley@...> wrote:

Thanks Bob, Really appreciate the help...........!!

I changed the reset section of the TCS Wow Steam 04. xml decoder file to this......... I was trying to get DecoderPro to use Direct Byte Mode instead of Paged Mode. Maybe I messed this up!
I swapped lines 2 - 3...

<resets>
<mode>DIRECTMODE</mode>
<mode>PAGEMODE</mode>
<mode>OPSBYTEMODE</mode>
<factReset label="Entire decoder (except speed table)" CV="8" default="2"/>
<factReset label="Entire decoder (except address and speed table)" CV="T2CV.5.0" default="2"/>
<factReset label="All sound settings" CV="T2CV.5.0" default="3"/>
<factReset label="Sound Function mappings" CV="T2CV.5.0" default="4"/>
<factReset label="Chuff timing" CV="T2CV.5.0" default="5"/>
<factReset label="Sound CV's" CV="T2CV.5.0" default="6"/>
<factReset label="Sound type volumes" CV="T2CV.5.0" default="7"/>
<factReset label="User Preset 1" CV="T2CV.5.0" default="8"/>
<factReset label="User Preset 2" CV="T2CV.5.0" default="9"/>
<factReset label="User Preset 3" CV="T2CV.5.0" default="10"/>
<factReset label="Quick Lighting Preset: Standard Ditch Lights" CV="8" default="10"/>
<factReset label="Quick Lighting Preset: Standard Trolley" CV="8" default="11"/>
<factReset label="Quick Lighting Preset: Modified Trolley" CV="8" default="12"/>
</resets>

Here's what got spit out in LocoNet monitor when I did a Reset / Factory Reset / USER PRESET 1...........
I noticed it is still operating in paged mode even though I switched things around so that it would prefer Direct Mode.
At least that's what I thought I did..........
Byte Write in Paged Mode on Service Track: CV201 value 5 (0x05, 00000101b).
LONG_ACK: The Slot Write command was accepted.
Programming Response: Write Byte in Paged Mode on Service Track Was Successful: CV201 value 5 (0x05, 00000101b).
Byte Write in Paged Mode on Service Track: CV202 value 0 (0x00, 00000000b).
LONG_ACK: The Slot Write command was accepted.
Programming Response: Write Byte in Paged Mode on Service Track Was Successful: CV202 value 0 (0x00, 00000000b).
Byte Write in Paged Mode on Service Track: CV203 value 0 (0x00, 00000000b).
LONG_ACK: The Slot Write command was accepted.
Programming Response: Write Byte in Paged Mode on Service Track Was Successful: CV203 value 0 (0x00, 00000000b).
Byte Write in Paged Mode on Service Track: CV204 value 8 (0x08, 00001000b).
LONG_ACK: The Slot Write command was accepted.
Programming Response: Write Byte in Paged Mode on Service Track Was Successful: CV204 value 8 (0x08, 00001000b).

So what do you think? Any ideas?
Thanks,
Tim