Hi Dave,
Everything you have written, I had already previously done.
However I have gone over it all again.?
I removed all instances of FTDI in the Libary/Extension folder, and re- downloaded the driver from the reference
you sent (the same one?as I had previuosly used).
There is a reference to Locobuffer in the system report for USB, and this does get removed when I unplug
the device and re-appear when I plug it back in.
After running the looping command in Terminal, and plugging in the LocoBuffer-USB device, nothing changed,
no device names appeared.
I have attached a screenshot.?
I have also attached a screenshot of the driver plist, i.e.
Library/Extensions/FTDIUSBSerialDriver.kext/plist showing the entry for LocoBuffer.
In System Preferences /Security and Privileges/ I can see no reference to the driver - this where I came unstuck before,
as I can not see any way to approve the driver.
Does any of this point to the Locobuffer being faulty. I have thought of getting a Digitrax PR4 but don't
want to purchase another device if that won't work either (It does not appear to be approved for the mac OS systems
only windows)
As an aside, my rail system works correctly with the Zephyr command station, and I can read and write CVs with that on the?
programming track. I also use devices from megapoint controllers, and can send DCC commands from that via the Zephyr.
I also have a throttle connected to loconet and that performs successfully I.e. the loconet does work,
any further thoughts or suggestions
many thanks
regards
Robert
?
