On Sat, Feb 8, 2020 at 6:12 PM Steve_G <RailRodder@...> wrote:
Hi Phil Need a lot more information. I take that you have: Created a layout panel. Set up all the blocks with sensors. Driven the train round manually and all the right blocks went occupied unoccupied the train went round. You put blocks into sections. (With direction sensors?). Sections into transits. All set up as all fwd or all rev. Added signals at all block boundrys. (Masts or Heads?) All SML for masts or SSL for heads set up and working. Dispatcher options set correctly.(using heads or masts must be set correctly). If you use the train set up exactly as shown you are driving the train......drive the train manually through the transit and check the occupancy and signals. Set to automatic. Remove the back and forth and see if that works. Then try B&F setting continious with a delay.
I normally recommend starting with 2 blocks, 2 section, 1 transit. Then if that works add one block and section at a time. Saves years of frustration. Stating with threes on the right track. Steve G.
