Hello Brad,
There are Select micros and V4 micros but there are not Select V4 micros. The
Select line is a "dumbed down" version of the V4. The selct can only be loaded
with ESU sound files, with the V4 the modeller can make their own sound files
and load them into whatever sound slot they may desire.
To install the Full Throttle features you will need a LokProgrammer. In the
files section there should be either a pdf or Word document listing folks
willing to help other ESU users, someone may live close to you...make a new
friend?
ESU uses a proprietary communications method to talk to their decoders, Decoder
Pro can only manipulate CVs within the decoder, it cannot load sound files or
firmware updates into the decoder, again the LokProgrammer is required for this.
Hope this helps.
John
toggle quoted message
Show quoted text
---------- Original Message ----------
From: "Brad Kobielusz via Groups.Io" <bkobielusz@...>
Date: November 28, 2019 at 1:42 PM
Hi all
I am have been looking into the possibility of using decoder pro to
upgrade Micro Select V4 decoders to the FUll Throttle version. My guess is
that it can’t be done I had considered trying to use a Full Throttle version
to clone to an older version with the same prime mover type. My guess is the
sound file is different enough that it needs a full new sound file loaded from
ESU. However knowing there are some pretty smart people on this list I
figured I would ask.
Thanks Brad
