Marc, Yes and no, both.
1 - Opening DecoderPro and setting it for Service mode programming.
2 - Opening the ROSTER entry for programming.
3 - Programming/Setting CV values.
4 - Issuing a Write changes to sheet, still getting 308.? Sheet write operations would come back 308 and change to red, even when the actual functionality became enabled upon testing with throttle.
5 - Toggling to Program on Main (Didn't need to do that, just needed to reset the DPDT to main track) - just needed to test with throttle with DPDT switch set to main and not reset to POM.
6 - Testing adjusted functionality and finding that values actually saved as expected, except on ditch light programming(multiple values had to be in sync, so had a conflict of two fx keys calling the same command, my fault. Now ditch lights are alternating).
So basically the programming is working, but I just tested again, by adjusting bulb brightness and although I received a 308 on Write, the change took.? Track was set to Service mode programming.? I can totally live with the 308, if somehow the decoder isn't acking properly.? If there's anything else I can try or adjust my sequence of operations, that would be great.
Thanks again for all of the assistance.? I've worked in support and I know that it can be "interesting".??
Russ
