Dave
Thanks for your feedback. I fully agree with you that I should ensure the conditions are correctly set up in MERG and to avoid using JMRI to inverting anything. Spent some time last night checking through my application and found that I need to get further information on the MERG sensor inputs to jmri. I found that the P1a sensors conflicted when trying to set the turnout to the OFFl (closed) position. This was due to the MERG CANMIO SVO output events simultaneously providing a high to both Events 1 & 2 resulting in both being active at the same time in the sensor table. Not surprisingly, The Turnout on the panel showed the correct movement and then reverted back to the ON (thrown) position. Both Sensors at this time were 'Active'.
More work to do in MERG to resolve this before applying the other sensors inputs from the turnouts.
In the mean-time. Can you please remind me of how I was able to set the sensors to provide feedback for the other turnouts? I have a still have a bit more time to continue with this before other things get in the way. I am determined to try to ensure I can do this in a concentrated way and avoid the long delays between sessions.
One other thing, I have left the default ' No Pull Ups/Down' in the JMRI sensor settings.
Best wishes
Peter?
