I looked at the EMD645 file again. ( By the way this file can be downloaded at ).
I left the setting points unchanged, due to lack of experience.
When I loop the notch2 file (D1.wav) with Audacity, there is no click. So, where does the click come from? VSD cuts each notch file into small pieces, which allows a faster reaction to throttle changes. The last piece of D1.wav is conspicuously short and, I think, causes the click.
Then I shortened the notch2 file a bit, created the VSD file EMD_645_Turbo2.vsd and uploaded it to
/g/jmriusers/files/VSD . Now I can hear to two different noises, but they are also in the original D1.wav.
Regards,
Klaus
Am 02.09.2019 um 16:02 schrieb conradandrose:
You are correct, I do have a click in notch 2.? my mod consisted of making a separate EMD645 file by removing all the other locos and changing the notch setting points to 10, 20, 30 & 100.? My note says it "works perfectly" but it does have the click at notch 2.? I also now see that the original notched at different points when accelerating and decelerating.? I don't know if what I did is prototypical.
Per Matt H's instruction, I've sent the vsd file to/g/jmriusers/files/VSD (/g/jmriusers/files/VSD )
