Bob,?
Here you go - the 'P' script first, then the 'S' script.
Also, this is happening on current production 4.16.
Sam
toggle quoted message
Show quoted text
# Transfer "TurnOut" Data from to an Arduino via Serial Transmission
# Author: Geoff Bunza 2018 based in part on a script by
# Bob Jacobsen as part of the JMRI distribution
# Version 1.1
# Connects JMRI Turnout "Watcher" to an Arduino Output Channel
# Note that JMRI must be set up to have a valid
# turnout table; if you're not using some other DCC connection,
# configure JMRI to use LocoNet Simulator
import jarray
import jmri
import java
import purejavacomm
# find the port info and open the port
global extportinP
portname = "COM5"
portID = purejavacomm.CommPortIdentifier.getPortIdentifier(portname)
try:
??? port = portID.open("JMRI", 50)
except purejavacomm.PortInUseException:
??? port = extportinP
extportinP = port
# set options on port
baudrate = 19200
port.setSerialPortParams(baudrate,
??? purejavacomm.SerialPort.DATABITS_8,
??? purejavacomm.SerialPort.STOPBITS_1,
??? purejavacomm.SerialPort.PARITY_NONE)
# get I/O connections for later
inputStream = port.getInputStream()
outputStream = port.getOutputStream()
# define a turnout listener that will
class Datatransfer(java.beans.PropertyChangeListener):
? # initialization
? # registers to receive events
? def __init__(self, id, value) :
??????? self.name = "PT"+str(id)
??????? self.closed = value???? # write this value to close
??????? self.thrown = value??? # write this value to throw
??????? turnout = turnouts.provideTurnout(self.name)
??????? turnout.addPropertyChangeListener(self)
??????? turnout.setCommandedState(CLOSED)
??????? return
?
? # on a property change event, first see if
? # right type, and then write appropriate
? # value to port based on new state
? def propertyChange(self, event):
??? #print "change",event.propertyName
??? #print "from", event.oldValue, "to", event.newValue
??? #print "source systemName", event.source.systemName
??? if (event.propertyName == "CommandedState") :
????? if (event.newValue == CLOSED and event.oldValue != CLOSED) :
??????? print "set CLOSED for", event.source.userName
??????? outputStream.write(event.source.userName)
??????? outputStream.write(",0")
????? if (event.newValue == THROWN and event.oldValue != THROWN) :
??????? print "set THROWN for", event.source.userName
??????? outputStream.write(event.source.userName)
??????? outputStream.write(",1")??
??? return
# The following will set up 5 listeners for Turnouts PT1 though PT6 (by username)
for x in range(1,6) :
??? Datatransfer(x,x+100)
# Transfer "TurnOut" Data from to an Arduino via Serial Transmission
# Author: Geoff Bunza 2018 based in part on a script by
# Bob Jacobsen as part of the JMRI distribution
# Version 1.1
# Connects JMRI Turnout "Watcher" to an Arduino Output Channel
# Note that JMRI must be set up to have a valid
# turnout table; if you're not using some other DCC connection,
# configure JMRI to use LocoNet Simulator
import jarray
import jmri
import java
import purejavacomm
# find the port info and open the port
global extportinS
portname = "COM4"
portID = purejavacomm.CommPortIdentifier.getPortIdentifier(portname)
try:
??? port = portID.open("JMRI", 50)
except purejavacomm.PortInUseException:
??? port = extportinS
extportinS = port
# set options on port
baudrate = 19200
port.setSerialPortParams(baudrate,
??? purejavacomm.SerialPort.DATABITS_8,
??? purejavacomm.SerialPort.STOPBITS_1,
??? purejavacomm.SerialPort.PARITY_NONE)
# get I/O connections for later
inputStream = port.getInputStream()
outputStream = port.getOutputStream()
# define a turnout listener that will
class Datatransfer(java.beans.PropertyChangeListener):
? # initialization
? # registers to receive events
? def __init__(self, id, value) :
??????? self.name = "ST"+str(id)
??????? self.closed = value???? # write this value to close
??????? self.thrown = value??? # write this value to throw
??????? turnout = turnouts.provideTurnout(self.name)
??????? turnout.addPropertyChangeListener(self)
??????? turnout.setCommandedState(CLOSED)
??????? return
?
? # on a property change event, first see if
? # right type, and then write appropriate
? # value to port based on new state
? def propertyChange(self, event):
??? #print "change",event.propertyName
??? #print "from", event.oldValue, "to", event.newValue
??? #print "source systemName", event.source.systemName
??? if (event.propertyName == "CommandedState") :
????? if (event.newValue == CLOSED and event.oldValue != CLOSED) :
??????? print "set CLOSED for", event.source.userName
??????? outputStream.write(event.source.userName)
??????? outputStream.write(",0")
????? if (event.newValue == THROWN and event.oldValue != THROWN) :
??????? print "set THROWN for", event.source.userName
??????? outputStream.write(event.source.userName)
??????? outputStream.write(",1")??
??? return
# The following will set up 5 listeners for Turnouts ST1 though ST6 (by username)
for x in range(1,6) :
??? Datatransfer(x,x+100)
?
