Thank for your reply Bob, all joints are Shrink?tubed.?
Yeah Steve. Learned that trick a number of years ago about resistor only on blue wire, sure saved allot of mumbling to myself, trying to fit resistors on each FX leads
Dave
In PA
toggle quoted message
Show quoted text
On Jun 17, 2019, at 11:44, Stephen Lowens via Groups.Io <
sjlowens@...> wrote:
Please educate me.? I've always put the resistor on the long lead which in turn goes to the yellow, white, green or purple wire, NOT the blue wire.? The thought being that if more than one of these LEDs are on at the same time, it would overheat the resistor if the resistor is on the blue wire.
Steve Lowens
