On Jan 11, 2019, at 12:19 PM, Bill Piper via Groups.Io <billpiper@...> wrote:

Hi,

Trying to get my Mac to see JMRI. I have an NCE Power cab, NCE USB interface. Serial Port is not showing up in JMRI setup

MAC OS X Mojave 10.14.2
JMRI version 4.14
NCE USB Interface - Removed Jumpers
Installed ( I think) Silabs USB driver for Mac.

Mac System Info shows
CP2102 USB to UART Bridge Controller:
? Product ID:??? 0xea60
? Vendor ID:??? 0x10c4? (Silicon Laboratories, Inc.)
? Version:??? 1.00
? Serial Number:??? 0001
? Speed:??? Up to 12 Mb/sec
? Manufacturer:??? Silicon Labs
? Location ID:??? 0x14200000 / 12
? Current Available (mA):??? 500
? Current Required (mA):??? 100
? Extra Operating Current (mA):??? 0

NCE USB connected with coiled cable supplied with Power Cab to right port on the right side.

Trying to set up Decoder Pro
System Manufacturer : NCE
System Connection: NCE USB
Serial Port: Only thing that shows up is cu. Bluetooth
USB Version V7.x.x
System PowerCab
Connection Prefix N
Connection Name NCE
Baud Rate 9600


Ran while : ;do clear;ls -lt /dev|head;i=$((i+1));echo $i;sleep 1;done in Terminal window, cu.SLAB_USBtoUART and tty.SLAB_USBtoUART never appeared when I connected device

PowerCab v 1.3
Cab address 02

LED on NCE USB are off

Appreciate anyone that can assist...