Support for the The ESU LokPilot Fx Nano is in JMRI V4.15.1 (and probably quite a bit earlier). It's under LokPilot Standard V1.0.
The LokPilot Fx series are function-only decoders and don't have a motor to pulse on to provide communication back to the programmer.
I don't have an Fx Nano but I connected my Fx V4.0 to my ESU tester (which connects a motor and all function outputs to the 8 pin socket) and JMRI was able to identify it fine.
If you restart JMRI, open the Help->System Console menu item and press New Loco-Read Type from Decoder, what appears in the system console (use Copy to Clipboard and post it for us)? It will tell us whether it was a failure to respond or a failure to identify (in which case the log has valuable identification information I need to know).
--
Dave in Australia
toggle quoted message
Show quoted text
On 5 Jan 2019, at 11:39 AM, "callaire@..." <callaire@...> wrote:
I just Purchased two new decoders, One a Zimo MX616N and a ESU Lokpilot FX Nano 8 Pin. Neither of these will self identify under JMRI.
