Do you need the latest version of JMRI for the offset address box? I haven¡¯t been able to find it.?
On Nov 17, 2018, at 11:05 AM, Dave Heap <
dgheap@...> wrote:
toggle quoted message
Show quoted text
Adding 4 will work, but obviously you can't access signal addresses 1-4, mor those at the top end.
Building your signal mast by using already-defined DCC Signal Heads (with the offset in) is a better approach.
Fixing the code is the long-term solution. I think there is an issue logged. I did take a quick look at the code some time ago when I was fixing some other issues but had trouble finding the relevant piece of code.
The New England Convention 2018
On 17 Nov 2018, at 11:47 PM, Ken Cameron <
kcameron@...> wrote:
If you manually adjust the address (is it add or subtract 4) for the offset,
does that work for the mast? So you set the address for the Light-It mast as
100, but enter 96 (or 104) as the address in JMRI. Would that work for the
mast?
