See below:
On 7 Nov 2018, at 9:16 PM, Richard_vanRaay via Groups.Io <richard_vanraay@...> wrote:
Wouter gave me a great link Tina photo of the USB interface but for the life of me I can't find the Jumpers on it! He gave a link to Tony's Trains.
When I study mine under a magnifying glass I am still unable to see anything that looks like it can be switched.
There are little black boxes with numbers like 271.
Is it the 8 pins that stick up that I believe I took a plastic case off when I bought it? It says SETUP right next to it. It is next to the LED near the curly cord.
Yes, it is the 8 pins in two rows between SETUP and 1 2 3 4. But don't worry. Simply leave them all bare.
Then JMRI preferences are:
-- System manufacturer: NCE
-- System connection: NCE USB
-- Serial port: COM4
-- USB version: V7.x.x
-- System: PowerCab
-- Additional Connection Settings checkbox ON
--- Baud rate: 9600.
Save and quit JMRI.
Turn off and restart Power Cab
Start JMRI.
The JMRI console log should then report V7.3.0.
I AIU,have theset the AIU's to 8 and 9
Good
WiThrottle is working.
Good
NCE show cabs keeps coming up error.
Don't know why. It works for me with JMRI V4.13.4 and the settings above.
All preference Defaults are NCE
Check them again after making changes.
Tell us if any LEDs are stuck ON on the NCE USB. They should not.
Post a Console Log and Ken can look over it while I try to get some sleep...
Dave
