I recall someplace (so usefull I know) a toggle to put a delay between throwing turnouts. It sounds like this could be enabled.
On Sun, Aug 5, 2018, 10:44 Petr ?¨ªdlo via Groups.Io <sidlo64=
[email protected]> wrote:
I have defined Signal Mast with matrix of 5 logic outputs - turnouts.
On LocoNet connection it works OK.
On XpressNet connection I have problem.
When I change aspect it works very slowly.
Two turnouts switch first. It waits for 5 seconds.
Then two turnouts will switch. It waits for 5 seconds.
Finally the last turnout will switch.
What I am doing wrong?
Petr
----- log -----
19:41:56.444: Accessory Decoder Operations Request: Turnout Address 105(Base Address 26,Sub Address 0) Turn Output 0 On.
19:41:56.446: Feedback Response: Turnout with Feedback Turnout: 105 State: Thrown Left; Turnout: 106 State: Thrown Right
19:41:56.450: Accessory Decoder Operations Request: Turnout Address 106(Base Address 26,Sub Address 1) Turn Output 0 On.
19:41:56.464: Feedback Response: Turnout with Feedback Turnout: 105 State: Thrown Left; Turnout: 106 State: Thrown Left
19:42:01.448: Accessory Decoder Operations Request: Turnout Address 107(Base Address 26,Sub Address 2) Turn Output 0 On.
19:42:01.638: Feedback Response: Turnout with Feedback Turnout: 107 State: Thrown Left; Turnout: 108 State: Thrown Right
19:42:01.638: Accessory Decoder Operations Request: Turnout Address 108(Base Address 26,Sub Address 3) Turn Output 0 On.
19:42:01.667: Feedback Response: Turnout with Feedback Turnout: 107 State: Thrown Left; Turnout: 108 State: Thrown Left
19:42:06.640: Accessory Decoder Operations Request: Turnout Address 109(Base Address 27,Sub Address 0) Turn Output 0 On.
19:42:06.661: Feedback Response: Turnout with Feedback Turnout: 109 State: Thrown Left; Turnout: 110 State: Thrown Left
19:42:06.762: Accessory Decoder Operations Request: Turnout Address 105(Base Address 26,Sub Address 0) Turn Output 0 Off.
19:42:06.792: Command Successfully Sent/Normal Operations Resumed after timeout
19:42:06.893: Accessory Decoder Operations Request: Turnout Address 106(Base Address 26,Sub Address 1) Turn Output 0 Off.
19:42:06.927: Command Successfully Sent/Normal Operations Resumed after timeout
19:42:07.028: Accessory Decoder Operations Request: Turnout Address 105(Base Address 26,Sub Address 0) Turn Output 0 Off.
19:42:07.233: Command Successfully Sent/Normal Operations Resumed after timeout
19:42:07.334: Accessory Decoder Operations Request: Turnout Address 105(Base Address 26,Sub Address 0) Turn Output 0 Off.
19:42:07.368: Command Successfully Sent/Normal Operations Resumed after timeout
19:42:07.469: Accessory Decoder Operations Request: Turnout Address 106(Base Address 26,Sub Address 1) Turn Output 0 Off.
19:42:07.503: Command Successfully Sent/Normal Operations Resumed after timeout
19:42:07.604: Accessory Decoder Operations Request: Turnout Address 106(Base Address 26,Sub Address 1) Turn Output 0 Off.
19:42:07.638: Command Successfully Sent/Normal Operations Resumed after timeout
...
