Alan,
I don¡¯t have any insight into the communication errors, but I am curious about the Logix correlation. Instead of the editing the Logix, select Browse. That will display the Logix in a text format. Select and copy the contents of the window and paste it in a reply. There might be something in the Logix definition that contributes to the problem.
Dave Sand
toggle quoted message
Show quoted text
On Aug 5, 2018, at 3:04 PM, Alan Gibbs <buggydriver17@...> wrote:
I would be very grateful for some help to identify the cause of the console error below which I have been trying to resolve for many weeks:-
jmrix.AbstractMRTraffic Controller ERROR - Auto Recovery from Error Message: 01 01 01
Retransmitted 0 Times
[liusbethernetXnetPacketizer Receive thread]
INFO - Message added back to queue 52 1F 8D C1
liusbethernet.L1USBEthernetXnetPacketizer
Transmit thread
This message may be repeated several times but only occurs when there is a logix.
Can somebody convert this to something more understandable for the less educated !! ?
The PanelPro layout which has Turnout, Sensor, Signal Head and Block Tables does not show any errors until logix is added, then when the first table entry is completed an error may appear (i.e it doesn't happen every time, similarly when the logix state is changed an error may occur.)
I have checked the adapter, i.e. the red XpressNet LED is on and the greed ethernet LED is lit. Sensor debounce is set to global.
Operating turnouts etc.,does not produce errors except when a logix is involved.
I have tried to capture the console error and XpressNet Monitor events and have put the screenshot in the photo file. (Console error-XpressNet Inf)
JMRI 4.12+Rb6a99b1 Java 1.8.0_181
Windows 10 HP 290 G1 MT
Lenz LZV100 v 3.6
Thank you for any help or advice
Alan Gibbs
