FYI Nelson, when writing to an ESU decoder, there are over 1500 CVs to write,
that does take some time. I also use the SPROG, when writing or reading with the
SPROG, I just go do something else, like get supper ready or cut the lawn.
John
toggle quoted message
Show quoted text
---------- Original Message ----------
From: "nelson.allison@... [jmriusers]" <jmriusers@...>
Date: August 16, 2017 at 10:02 AM
tested on a Windows 7 system (mainly Panel Pro) all functioning as normal,
converted CMR/I hardware to cpNode hardware (which it is), some tweaking
required but hardware functioning as expected. Documentation on setting up the
cpNode software would be an asset.
tested decoderpro on a pi-sprog and all functions are working as
expected.....still way slow to read ESU decoders.
