Richard is right in that the top of the wye turnout can抰 have 2 different addresses, but a Macro would do very nicely as they can use addresses in all kinds of combinations.
Macro 1
Coming from the west throw west turnout to diverging and the turnout at the top of the wye to normal
Macro 2
Coming from the east, throw east turnout to diverging and the turnout at the top of the wye to diverging
(terms at the top of the wye such as normal or diverging don抰 particularly matter they just need to be identified.
Macro 3
Both west and east turnouts for the mainline are set at normal for through the main operation. Don抰 worry about assigning the turnout at the top of the wye as your other macros will choose the correct alignment when selected.
Thomas Cain
Indianapolis, IN
atsf93@...
Modeling the Eastern Illinois Santa Fe from the Prototype
See my website and layout at: www.atsf93.com
On Jun 28, 2017, at 7:18 PM, 'Richard On Comcast (imap)' rstamm4@... [jmriusers] <jmriusers@...> wrote:
Stu
The issue is how to identify the two turnouts in the Panel so clicking on either one activates the turnout since both are effectively the same address and you can't have two turnouts with the same hardware address. Not sure how you would use a macro.
Richard
Sent from my IPad
[Non-text portions of this message have been removed]
