Hi Dave
I have not created any block table, the only tables I created is Turnout Table with System Name IT5 and NT1 to NT4, User Name Turnout 1 to Turnout 5. Sensors Table with sensors IS801 to IS807 System Name, and Block 801 to Block 807 for User Name, plus IS901 to IS904 System Name and Interlock 901 to Interlock 904 for User Name. Also in Layout Editor I placed 5 single Turnouts L and R as per configuration of the JMRI Panel Tutorial by Bob Bucklew with no track line connection between turnouts. B. Bucklew doesn't use Block Table in this tutorial, I have done it in version 3.11... and 4.0 and works great, this new Layout Editor after save the panel, if open with an xml Editor shows IB1 to IB7 System Name and Block 1 to Block 7 user Name, I don't know where these blocks come from, and the <filehistory>at the bottom of the panel builds up for ever for each time save and open the panel I thought this was fixed after v 3.10...
Thank You for responding.
Vince
toggle quoted message
Show quoted text
-----Original Message-----
From: jmriusers@... [mailto:jmriusers@...]
Sent: Sunday, June 18, 2017 4:52 PM
To: jmriusers@...
Subject: [jmriusers] Re: Problems with LayoutEditor
Vince,
I am not able to re-create your magic block problem. For now you should be able to go to the block table and delete the block.
The "Additional Name" field is used to assign the second turnout for "Single Slip" and "Double Slip" switches. These require two independent turnout controls.
Dave Sand
------------------------------------
Posted by: dave@...
------------------------------------
------------------------------------
Yahoo Groups Links
