I have been using panel pro (version 4.0) to run my nce layout for almost 2 years. I created a reset "route" that I use on startup to allow my system to learn the position of the turnouts and block detectors.
I cannot figure out why my turntable randomly moves under 3 circumstances
1) on opening the panel pro program
2) on running the reset program
3) randomly then trains are running on the layout.
I did not include the nce switches assigned to the turntable in the reset route and have also tried deselecting the dcc control feature of the turntable in panel pro.
I also tried changing the dcc address on the turntable control box .
Very weird!
Btw the turntable otherwise works fine when controlled by panel pro, the table control box, or the nce power pro.
Russell Amico
