¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Ic7000
  2. Topics

software

 

Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

¿ªÔÆÌåÓý

RT Systems?IC-7000 RADIO PROGRAMMING SOFTWARE

Jim WI6X

On Mar 31, 2023, at 7:09 PM, ZL2AAA <zl2aaa@...> wrote:


Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

2 others I know of besides RT Systems.

Rumtrol7000 - can't find a download for it but I have it so DM me if interested.

and IC7000BKT

Danny
K5CG

----- Original Message -----
From: "ZL2AAA" <zl2aaa@...>
To: "ic7000" <[email protected]>
Sent: Friday, March 31, 2023 9:09:17 PM
Subject: [ic7000] software

Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

I have, works great.

73's - Glenn

On Fri, Mar 31, 2023 at 7:09?PM ZL2AAA <zl2aaa@...> wrote:

Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

¿ªÔÆÌåÓý

Ditto on RT Systems. I have been using their products for years.

Michael Gardner
K1MLG
iPhone?
??



On Mar 31, 2023, at 10:44 PM, James Dahl <wi6x.73@...> wrote:

?RT Systems?IC-7000 RADIO PROGRAMMING SOFTWARE

Jim WI6X

On Mar 31, 2023, at 7:09 PM, ZL2AAA <zl2aaa@...> wrote:


Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

Chirp. Free, works, no need to pay stuff here
 

Hi Morrie,

I use the IC7000 software from here:
www.qsl.net/iz2nxf/

It is simple, and works just fine.

73 de Phil GU0SUP

-----Original Message-----
From: "ZL2AAA" <zl2aaa@...>
Sent: Saturday, 1 April, 2023 03:09
To: [email protected]
Subject: [ic7000] software


Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

Thanks for the replies.I have had a RT systems disc loaned to me but I can not get it to download the frequencies on the ic7000 .I suspect the interface cable but have no idea how test it. This is a priority device so my other interface cables dont work with RT.I thought I might try another programme to prove a point?
73 Morrie

On 1/04/2023 3:09 pm, ZL2AAA wrote:

Has anyone used software to programme the IC7000.If what one.Thanks
Morrie
 

If your cable is trying to use a Prolific system driver, that is probably the problem.? ?There were so many Chinese clones of the Prolific chip set, that they rewrote their drivers to not work with the cloned chips.? When Microsoft updates,? it loads the new driver.

The solution is to find a programing cabe that uses the FTDI chipset.? Also check your device manager for correct port and speed settings.

Since you're using RT software,? I understand it will no run on Mac or Linux,? but I? could? be wrong.?

Joe KR0UT?

On Sat, Apr 1, 2023, 4:32 PM ZL2AAA <zl2aaa@...> wrote:
??Thanks for the replies.I have had a RT systems disc loaned to me but I
can not get it to download the frequencies on the ic7000 .I suspect the
interface cable but have no idea how test it. This is a priority device
so my other interface cables dont work with RT.I thought I might try
another programme to prove a point?
73 Morrie



On 1/04/2023 3:09 pm, ZL2AAA wrote:
>
> Has anyone used software to programme the IC7000.If what one.Thanks
> Morrie
>
>
>
>
>
 

I have found that even the cheapest Baofung (sp?) programming cable will work for the IC-7000 TTL logic rs-232. Buy one that says it will work with WIn 10 and cut the connectors off and take the two "hot wires" and solder the two to the tip of a 3.5 mm plug and the shield to the ground.
I have used these adapters without problems for years.
On quick check would be to download WSJT-X and connect to the CAT and control the frequency of the radio.
If it will do that you should be able to use RT systems.
As a matter of fact try that with you existing cable as you can quickly check for CAT connections on the cable you currently have.

1 - 10 of 10