开云体育

The 7K has only a forward power detector circuit for VHF/UHF -- no reverse power detector.? So it has no SWR checking.? It relies on the SWR foldback built into the PA FETS, which I'm not sure is a

We are still beta testing before final release will look carefully into that on this and other radios like 746pro, etc... -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC WWW.VE2DX.COM (

My understanding was that it still had a swr checker but didn’t display it. It limits transmit power when high swr is found on VHF and UHF correct? Seth - KD0TEL

The IC-7000 doesn't have an SWR detector for 2m, 70 cm bands, so a meter that only reads ci-v data from the radio won't display VHF/UHF SWR, only HF. Steve, W3AHL

still doing beta tests, need to find a 7000, let recheck some of the ci-v commands to verify... I will add this to 7000, 746, 9700, etc... -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX

Affraid not Larry, the 756ProII is missing a couple of important CI-V commands that really was hurting us when trying to included them, we went as far as we could looking into 30 different ICOM radios

That's excellent! Does it show SWR when transmitting on 2 meter / 70 cm from an IC7000? [email protected]> wrote:

I notice the IC-756pro2 is missing from the line up but the pro and pro3 is there.... Larry W8LM...

Testing back at ya. Hope you have an awesome day.? 73Stephen AD7AB On Mon, Jul 11, 2022 at 11:11, Adam Farson<afarson@...> wrote: Test message; please forgive. 73, Adam VA7OJ/AB4OJ

Hello guys, as some of you are aware I have a small lab where I work on Ham Radio devices and have been doing a lot of work around CI-V devices and hubs. Well after many months of work, I am

Thanks, Steve.? That's very valuable input. While I know the arrow beams and guys who have worked the satellites with one, my intent would be weak signal -- SSB, CW, FT8 or something like that.?

The ground goes to the ground and the RX and TX are tied together and go to the tip of the 3.5 mm plug. The ground, of course) goes to the ground. I have used several of these with a number of radios,

Avoid the Cushcraft VHF/UHF interlaced Yagi's, such as the A270-10.? They use a single feed point with a T-connector to drive both driven elements.? Since the 2M antenna is resonant as a 3/4 WL

Country code #08 is an EXP(ASIA) model.? The only reference to it I've ever seen was in a Technical Information bulletin on expanding the frequency coverage ranges issued in 09/25/2005. Steve,

https://www.amazon.com/ci-v-icom-cable/s?k=ci-v+icom+cable Take your pick but please use one with the FTDI chip. If this works directly without the CT-17, you’ll know you have a working

I have used the CT-17 compatible cables from Valley Enterprises on multiple 7K for years.? ?Available in 10' & 3' lengths (shorter is better for less RFI) at the first two products shown at:

I offer CI-V hubsbof many different configurations the CT17B made by me at WWW.VE2DX.COM -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC WWW.VE2DX.COM ( https://WWW.VE2DX.COM ) Only the

Need help with TTL cable connection. Looking for the driver but no result

Hello Barron Thanks for your reply Need help with TTL cable connection. The computer does not recognize the cable.

Regarding a battery pack, I would also like to be able to use it as originally intended! 73 de Mac, K2GKK in OKC, OK, USA