开云体育

It may be a ribbon cable that connects the controls to the main board or head unit. I know it sounds crazy but I had a 746 and the memory channel knob would only work in one direction after it had

My IC7000 has a problem where the volume/squelch control and the control below it are inoperable.?I don't know if it was dropped or something whacked it somehow. The volume is running at full output

Hello. I desperately need a complete front control panel. Do you still have one available?

Seriousluy. How would you expect it to be zero when you have a digital on/off switch ?

It draws current whenever? connected to power as the power to the front panel and the CPU is present to send the wake up serial signal from the front panel CPU to the main CPU. They are in a low

I checked my battery drain going to my IC7000? when the transceiver is OFF. It is 2 ma.? Is this normal ?? I would have assumed it would be 0. Does this indicate that I have leaky electrolitics in

Where are you located? On Fri, Nov 10, 2023 at 18:43, WA3RSL<fdew22@...> wrote: I'd sell it with an AT-7000 for $650.00. The problem is very intermittent. I've been having QSO's with it. It

The AT-7000 was LDG's antenna tuner that was made to complement the IC-7000 as an alternative to Icom's AT-180. -Brian, KB3ORR

The matching auto tuner.

What is a AT7000? ________________________________ Sent: Friday, November 10, 2023 5:43:07 PM To: [email protected] <[email protected]> Subject: Re: [ic7000] Ic-7000 cuts off until warmed up I'd sell

I'd sell it with an AT-7000 for $650.00. The problem is very intermittent. I've been having QSO's with it. It is super clean! 73 Frank WA3RSL

Hi, During recent activation of POTA, I had unusual behaviour on my IC7k. Suddenly signal goes to S9 but no sound from speaker, blocking all received signals. After 1-2 second "bloking" signal

Hello All. Problem with IC-7000. After about a 20 minute warm-up no problem. I acquired an IC-7000 from a silent key. Maybe it was used once. Perfect except when I first turn it on it comes up fine.

Jorge, Welcome to the IC7K - great radio ... I have mine tied to an AH-4. 73's, Glenn WA6BJQ

Welcome and congratulations on your upgrade. Jason NV5DS Jason MacDonald ________________________________ Sent: Sunday, November 5, 2023 1:33:29 PM To: [email protected] <[email protected]> Subject:

Hello, here Jorge, Lu1da, i have my 7000 for a month, replacing my old and dear IC706mk2g, and I am very happy. Hopeto enjoy the same way with this transceiver. 73 from Argentina de LU1DA

I’ve never understood why a cheap child’s digital wrist watch from the 80’s was able to be more accurate and maybe only lose a few seconds a year… yet we pay thousands for ham gear that is

Thanks Rich. My plan is to connect it to my pc. Ed

If you are connected to a computer, most logging programs can synchronize the radio clock with the computer clock automatically. Radio clocks are notoriously inaccurate (it’s not really an

Update.Radio on and lifted on. I set the clock on Nov 1 at 0503z. Day 2 - time off by 12 sec. Day 3 - off by 18 sec. Day 4 - off by 25 sec. Today - off by 32 sec. Not sure that a new battery will