开云体育

Sure, that I know and are aware of. But it is the same behavior in all modes. /SM6VFZ Den m?n 3 apr. 2023 15:13Steve Murphy <KC4SM@...> skrev:

At the risk of raising a fiery debate; Have you considered replacing the IC-7000 with an IC-7100? Newer technology, has an USB port for sound and CI-V control. Being in use on a boat, this may be

Price? wrote:

I have a new logic unit for the 7000 tech told me that was problem with rig got a new logic unit from Icom same problem removed the new unit it is now for sale

Make sure the radio mode is CW. Any other mode and you won't hear the side tone. 73 de KC4SM Apr 3, 2023 12:04:27 AM Daniel Uppstr?m <vfz.daniel@...>:

Thanks all who have offered. Im sorting through them now. Chip AE5KA

Hi group, I am trying, and trying, to get the CW keyer memories play. But they simply won't. I can set the content of the four memories without problem, but when going into KEY->SND and then pushing

I wonder if you couldn't force the IC-7000 power output down to 0 if you input a voltage on the ALC input of the Accessory connector (pin 6). if it works you could build an external delay circuit to

I used the ARB-704 with my IC-7000 and Heathkit linear. While the IC-7000 does use a relay it has a low voltage and current rating and would be an issue changing it out. I am not aware of a keying

Some of this may have been covered before, and if so, I apologize for possibly bringing some of it up again. I'm currently running in my shack, an Icom IC-7600 into an ARB-704 buffer interface into an

Think I have another N-in-B IC-7000. Will check. What's it worth to you, sir? Craig WA6OXK ________________________________ Sent: Sunday, April 2, 2023 11:29 To: [email protected] <[email protected]>

Chip I have a new-in-box IC-7000.? You can have it for what I paid, but I have to dig and find the invoice from DxEngineering. Craig WA6OXK

Would you want to sell it to a guy who likes to work on blown up radios?

My IC-7000, installed on my boat, has died in a direct lightning strike. I would like to replace it with another, in anyone has one to sell. Thanks Chip AE5KA

I have found that even the cheapest Baofung (sp?) programming cable will work for the IC-7000 TTL logic rs-232. Buy one that says it will work with WIn 10 and cut the connectors off and take the two

If your cable is trying to use a Prolific system driver, that is probably the problem. There were so many Chinese clones of the Prolific chip set, that they rewrote their drivers to not work with the

Thanks for the replies.I have had a RT systems disc loaned to me but I can not get it to download the frequencies on the ic7000 .I suspect the interface cable but have no idea how test it. This is a

Hi Morrie, I use the IC7000 software from here: www.qsl.net/iz2nxf/ It is simple, and works just fine. 73 de Phil GU0SUP

Chirp. Free, works, no need to pay stuff here

Ditto on RT Systems. I have been using their products for years. Michael Gardner K1MLG iPhone ??