开云体育

Is there a way to select different memory banks? in Chirp for the IC-7000? I cannot select bank B, for example, for memories that were added to bank A. 73, John, NX2I

Pin 3 of the ACC Socket (13 pin DIN). To: [email protected] Sent: Wednesday, November 30, 2022 2:27:46 PM Subject: Re: [ic7000] PTT outlet and CI-V control Where is the port for the send signal

If I remember correctly it is on one of the DIN plugs ACCY 13 pin plug pin 3 (HF)(Page 12 of your manual) . Page 21 of your manual shows the hook up to a non-ICOM linear amp. You may need an external

Where is the port for the send signal to the linear on the rear of the IC7000?

Could you use the send signal from the radio that would key a linear to control the SDR switch? It might work quicker than the C-IV.

Can the CI-V control outlet on the rear be used as a PTT outlet to control a MFJ-1708 SDR switch?

This morning, my IC7000 started producing a very loud "scratchy" noise when in RX.? It is not RF since it will produce the noise with the antenna disconnected, band and mode don't affect the noise.?

*UPDATE* : I changed the display?but this didn't fix the problem, also I removed and cleaned the cpu, also tried the red cap in the screen module with similar result, display still showing not

Hi guys wen my ic 7000 is in service mode i cannot adjust the power settings. ever had this before?

I apologize - i was out of town. Sent you another email. KD8M 85635.

Great job, Tony! I think that measuring the signal path is really the only way to really repair almost anything. I have found that sometimes these radios do have bad connections, from the ribbon

Fault Resolved..... Ok, I traced the missing amplification between the generated signal and the driver to bad bias on Q101 in the pre-driver stage, Q102 was behaving normally, Q101 was attenuating,

Thanks, I've been in touch with Dave, unfortunately the rig has sold. Thanks and 73

Hi David Miller, I have a purchaser. His name is Dave Doran. He is copied on this email. Please reach out to him: davethesoundman@... <mailto:davethesoundman@...>

Sent you an email couple of days ago re offering $825 shipped to Fl.33319 paypal ppayment Rupert

Shipping to Florida? Thank you de AI4HO TIM

My mine also ran warm to hot but found an external fan on eBay and never had an issue for over eight years. TonyKH6TG

I have a ic 7000 remote kit for sale?Sealed in orginal boxNerve unboxed?I would like? 175$? plus shipping?Naturally? no extra charge if picked up.I am just south of Portland by i5.Ka7qqvDon

Here's a thought. When Icom, or any other manufacturer, find a design fault in their equipment. They repair all under warranty and make changes to the design in the next production run. They never

hi alI, I have decided to sell my ic 7000.? It is in good shape and have a new hm 151 to go with it...? manual, remote cord and grounding screew, mounting braclet and asorted plugs and screws that