开云体育

Hi Giuliano Do you have this issue in all bands (HF/50/VHF/UHF) or not ? It’s important to know because if this trouble happens in all bands, I suppose that you are a fault in driver mosfet

Hello everyone I have a problem with my Ic 7000 this is it, the problem is on the TX part, it usually works regularly but suddenly it happens that the power drops considerably, for example it goes

Very true on the chip set troubles. This 1 is FTDI and works great for HRD to connect to radio and control the rig. I already downloaded the software but it is useless without the cable from RT

That's probably best, and Chirp may work for you using the rt cable. Some usb/rs232 cables used a cloned chip set that is not compatible with current drivers, and windows hates old drivers. Usb

Been thru all of that. Was able to read radio 1 time out of 50 tries. Edited my file to add some stuff an now cannot write back to radio. Wife spent the 50$ to buy the RT Systems software and cable.

I haven't tried this but, (I love advise that starts this way. :) ) Have you tried saving one or two frequencies to the ic-7000 memory and then uploading to Chirp? It is also possible that you have

Hello All, Anyone happen to have a IC-7000 file that was done with CHIRP software. Trying to setup some memory channels in my 7K and CHIRP will not save the empty memory files to my pc so I can edit

hello Gang, Here are my new Acrylic Call Sign Displays, with Dual LED Zones and ICOM CI-V Bluetooth hubs or Yaesu FT8X7 Bluetooth interfaces. Drop-in to WWW.VE2DX.COM or contact me at ve2dx@... if

Page 38….

I have a new amplifier and need to run <12 watts so will need to reduce my output power on a continuous basis. Is thi sage for the IC7000?

Thanks to all, I understand now 73 and Kind Regards, Marius Lubbe - Cape Town, South Africa

I believe the CI-V cable would go directly from the computer to the IC-7000. SignaLink would process audio and CI-V would control CAT and PTT. I’ll be trying a similar setup soon with a

You need a USB to TTL level RS232 cable. I have used several different types when I had an IC-7000. The least expensive is tp buy a cheap Boefeng programming cable and cut the end off and replace it

The civ cable is not needed to use the signalink. It does provide frequency data and control of the 7000 from the computer for programs. The signaling is the audio interface. Connect the civ cable

The CIV cable needs to have a USB adapter on it and have it plugged into your com[puter. You will only need the CIV cable if you want full rig control. The signallink will provide PTT signal through

I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable. Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the

I used the Ameritron ARB-704 with my IC-7000 and Heath SB-200. Buy the Ameritron and never look back and if you get finished with it later you can easily sell it. I eliminated my linear setup by

Yes, get the one with the Relay.? Or buy an Ameritron ARB-704 to go with the cable.Steve WA8Y?Sent via the Samsung Galaxy S10, an AT&T 5G Evolution capable smartphone

William, I highly recommend buying the cable with the relay! It’s a bit more expensive but it’ll protect the switching circuit in the radio. Greg NZ6E Sent: Wednesday, January 19,

Radio to amplifier interface