开云体育

I’ve used mine with a AT-200 with ?cable and it works well very good on a MFJ ham sticks I used a MFJ tuner and had a lot of problems with it. That is when I switch to a LDG tuner

I’ve used my AT-7000 with my IC-7000 for years on a multi band vertical and a 40mtr dipole with no problems. KC5IAJ

I run one with the 7K in a Freelander 1 for tuning up a 102 whip on HF - works well down to 40m. Make sure well grounded and I have plenty of ferrites on cables. DX wise in the last few years and the

Anyone run this ATU with their 7K, ive got a loaner IC-7000 to take on a trip with a view to buying it, it has an AT-7000 with it but no lead, just ordered the connecting lead from one of the UK

Dear David, Dropped email to your qth.com email ID, kindky respond.. 73s [email protected]> wrote: communication. <andrey.kravchuk@...>

Sorry. I do not ship outside of the US. I should have said this in the communication. David J. Wilcox K8WPE’s iPad

Hi, David! Give price for tuner and transceiver. Can you shipping to Russia, Moscow?? Best regards,? Andrey (50CHB99). Отправлено из мобильной Почты

I have a pristine Icom AT-180 automatic antenna tuner that I bought years ago, used it once, and put it aside with my 706 Mk II G in an emergency go kit.and then never used it.? I am mainly into QRP

I have a pristine Icom AT-180 automatic antenna tuner that I bought years ago, used it once, and put it aside with my 706 Mk II G in an emergency go kit.and then never used it.? I am mainly into QRP

The Clue is in the Subject line!? Bob

No, specifically the MFJ-706 or MFJ-7000! Bob

Are you asking about an Icom IC-7000 and IC706? They cover the same frequency range. The discontinued 7000 has a color screen and digital filtering. The 706 series needs crystal filters. The

I would also like to see the list Bob. [email protected]> wrote:

like to see the list

If you are into homebrew you just need four resistors and four press button switches....details are in the 7000 manual. 73 Steve G4EDG

Hello, I'm trying to control the voice memories of the IC-7K through N1MM+. The voice memories are located at MENU>S1>VO(F1)>T1-T2-T3-T4 Using the Date Format on page 142 of the manual here's what

Don, you are sooooooo right!!! I totally forgot about the fuse "situation", not to mention as you said, if it ain't going into 50 ohms, all bets are off. I remember removing the Icom fuse holders and

Oh yes I have played with fuses twice?They caused my half power issue?I tore apart fuse holder and cleaned ther solderd crimp conection? no issue after soldering? crimp.Sent via the Samsung

Hi guys check also your cable with fuse, often these fuses give some trouble to PA stage. try with a short cable without fuses and on dummy load. Icom 7000 should run with 100 watt in 50

Rember Specification. 50 ohm dummyloadAntenna is not normally 50 ohms.Sent via the Samsung Galaxy, an AT&T 4G LTE smartphone