开云体育

Spence

Hello JIM, N2ZZ, I have just joined this group ans as such moved from the Yahoo-group with same namen. I am a licensed radio-amateur; 73 de Andre, ON7UM

Please remove me from the group Thanks Ken n8gnd Sent from Mail for Windows 10 Sent: Tuesday, March 6, 2018 10:47 PM To: ic7000@... Subject: [IC-7000] Pending transfer to

That's a shame. Better the devil you know. 73's every

YAY YAY.....Good move. I've done that with a couple of groups, and am real pleased!! Thank you. 73, Carl AB1DD Resistance is futile. (don't know about reactance,

It will be just fine... thanks for your work on behalf of the group! Phil

Jim, Let us know when the change comes, and I'm sure most of us will follow. Curt WA2JSG ?

Thanks for taking the decision. Any tips on supporting s smooth transition? Kurt KD6LZV

Jim, Sounds good to me, I'm with you. Yahoo is increasingly difficult to deal with. Been trying to quit a group I no longer have interest in, no luck.. 开云体育 is great, see you there! All the

To all, We have been with Yahoogroups since 2005. We have over 6000 on this list! I have been resisting the move, but Yahoogroups has been very flaky lately. As a moderator, it has been very

Sell, very good physical and operating condition ICOM IC-7000. Comes with original excellent condition (No notes /writing) factory manual, packaging, multi-function HM-151 microphone and full length

Thank you for taking the time, I believe I got it George KF5NAJ

Pin 3 of ACC is switched to ground when transmitting. You can provide 12 volts DC to the coil from pin 8 of the ACC port or from an external source. It is important that the relay coil has a

I'm using a small 12v relay to activate the larger Dow-Key I assume it changes #3 pin and another pin ? to a N/O and common pair of contacts that closes on transmit Please confirm that I supply the

Thank you for answering I'm trying to use a small 12v relay to activate the larger Dow Key I need 12v on keying the mic to make it work or a N/O and common were I will supply 12v Thank

George, I doubt that ANY Icom rig can directly key ANY Dow-Key relay! All of those require considerable amounts of current with the highest current needed for the lowest voltage relays. 73 de Mac,

See the User Manual, page 12. The ACC connector, pin 3, HSEND is pulled low to ground on HF TX. Maximum current sinked is 200 ma. so verify what your relay draws first. Changing Setmode menu item

I have a Dow Key T/R relay that I want to key on transmit I already have two interfaces one needs 12v on transmit to activate the other needs a N/O to a common (I supply 12v) when transmit both

Hi Ron, If I remember correctly, if you do not have anything plugged into the remote antenna connector (the plastic Molex on the radio), the “tune” button does not work. Give it a try. GL

Try this guide by Gary, ZL2IFB. https://dx-world.net/ft8-operating-guide-by-zl2ifb/ https://dx-world.net/ft8-operating-guide-by-zl2ifb/ It will help you get started using FT8. 73 ES GUD DX,