开云体育

https://eham.net/classifieds/604682 In case you're looking for one. It's not mine, I just came across the ad.

I haven't seen this problem before, but did check my two 7K's ( circa 2006 & 2010) per your description and don't see anything similar. I suggest looking at the output of the Driver board to see if

Hello, I am new to this group. I did try to send this before and I didn't see it pop up in the list so apologies if it comes up twice. I have been looking at a crook IC-7000 for a friend of mine which

Hello, I am trying to fix a friend's 7000 that is iffy on TX on 10 & 14 MHz. I immediately think that there maybe an issue with the LPF relays / components on these bands as I see that the 10 and 14

As much as I love my IC-7000, the form factor question is easy.? The IC-7000 has a bunch of menus (3 groups of 3) and the screen is fairly small (for old eyes).? I also have three IC-7100 units.?

I was afraid that might be an issue. Never have understood why Icom went to that form factor. Could have at least put a 1/4‐20 tripod mount on it. 73 Joe KR0UT

The remote head of the IC7000 is key. While a 7100 would be nice, it would take up real estate at the nav station desk.

Yes sometimes it is - and I believe I found something now; When pulling out the plug for my cw-key from the jack at the transceiver back, the keyer then started to work as expected. Looking in the

Well, sometimes it's the simple things we overlook. Just thought I'd throw that out there. Very odd. My 7000 CW memories do not make a button press confirmation beep. Just sends the stored message.

Sure, that I know and are aware of. But it is the same behavior in all modes. /SM6VFZ Den m?n 3 apr. 2023 15:13Steve Murphy <KC4SM@...> skrev:

At the risk of raising a fiery debate; Have you considered replacing the IC-7000 with an IC-7100? Newer technology, has an USB port for sound and CI-V control. Being in use on a boat, this may be

Price? wrote:

I have a new logic unit for the 7000 tech told me that was problem with rig got a new logic unit from Icom same problem removed the new unit it is now for sale

Make sure the radio mode is CW. Any other mode and you won't hear the side tone. 73 de KC4SM Apr 3, 2023 12:04:27 AM Daniel Uppstr?m <vfz.daniel@...>:

Thanks all who have offered. Im sorting through them now. Chip AE5KA

Hi group, I am trying, and trying, to get the CW keyer memories play. But they simply won't. I can set the content of the four memories without problem, but when going into KEY->SND and then pushing

I wonder if you couldn't force the IC-7000 power output down to 0 if you input a voltage on the ALC input of the Accessory connector (pin 6). if it works you could build an external delay circuit to

I used the ARB-704 with my IC-7000 and Heathkit linear. While the IC-7000 does use a relay it has a low voltage and current rating and would be an issue changing it out. I am not aware of a keying

Some of this may have been covered before, and if so, I apologize for possibly bringing some of it up again. I'm currently running in my shack, an Icom IC-7600 into an ARB-704 buffer interface into an

Think I have another N-in-B IC-7000. Will check. What's it worth to you, sir? Craig WA6OXK ________________________________ Sent: Sunday, April 2, 2023 11:29 To: [email protected] <[email protected]>